Urinal Flush Controls (Mains)

Description

Product Overview

Urinal Flush Control System
By installing a Urinal Flush Control System you can save up to €2,000 per year.
Drastically cut your water consumption by installing the Renergise – Autosave Infrared Urinal Flush Control –  mains powered for zero maintenance. ‘Easy to install and commission, with long service life, this control is one of the best and most reliable on the market’ according to our customers.

240v mains operated 15mm Urinal Flush Control with remote PIR sensor for cisterns fitted behind panel work. Choose either single-gang (SG) or mini-ceiling (MC) remote sensors, each supplied with 5m of prepared cable. The Renergise – Autosave urinal flush control saves water by flushing urinals only after use. A built-in infrared PIR sensor detects persons in the toilet area and initiates a cistern fill and flush cycle a preset time later. A pre-wired remote solenoid valve allows flexible siting.
A simple pushbutton setup procedure sets the cistern fill time and a programmable switch enables the installer to choose the flushing frequency and also to set a hygiene flush interval for periods when the building is unoccupied.

Save up to 80% now by installing Renergise – Autosave Urinal Flush Control

Applications

Bathrooms, Golf Clubs, Hotels, Hostels, Hospitals, Leisure Clubs, Nursing Homes, Offices, Universities, Schools, Shower Rooms, Sustainable Homes

Benefits & Key Features

• 6 – 12 month typical payback period
• Save up to 80% on metered water bills
• Guaranteed for 3 years
• ECA listed
• WRAS approved
• Choice of 3 remote PIR sensors
• Simple one button setup procedure
• Programmable flush delay and 12 or 24hr hygiene flush
• New Magi-test operational check for the site manager or janitor
• Optional counter gives instant check on number of flushes enabling savings to be readily calculated
• Suitable for LH or RH water inlet
• Mains powered – fit & forget solution
• Fail-safe valve – closes if power is removed or fails
• No need to reset after power cut
• Remote sensor includes prepared cable and instructions
• Fitting kit includes isolating valve, cable glands, locking screws, fixing screws and installation instructions

Certificates:

ECA listed & WRAS approved

Warranty Details:

Standard 3 year manufacturer’s warranty

Product Code:

Ren-Autosave-M02-SG

Remote Sensors:

See below for Remote Sensor options with codes
Choose from the three options below. All remote sensors feature a high sensitivity PIR detector with a range of 5 metres and an angle of > 100°. Supplied complete with 5m length of 3 core cable.
Please contact sales department if you have any special requirements.
Single Gang Sensor high sensitivity 5m 100° range, standard 85 x 85mm panel, depth behind panel 15mm, suitable surface or flush mounting, detection led,  white finish, removable label.
Mini-ceiling Sensor Discrete Architect approved design – bezel diameter only 38mm ( 1½”), spring fit from beneath into 30mm hole, overall height 90mm, bezel white RAL 9010